Enterasys Networks CSX7000 Uživatelský manuál Strana 614

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 729
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 613
USER’S GUIDE
614 CyberSWITCH
SERIAL INTERFACE COMMANDS
These commands are available only when you have a serial interface card (V.35 or RS232) properly
installed:
ser <#> stats
Displays the current serial interface statistics for each line (V.35 or RS232) attached to the card
in the specified slot #. Refer to Serial Interface Statistics for a list and definition of these statistics.
ser <#> clear
Clears the current serial interface statistics for each line (V.35 or RS232) attached to the card in
slot #.
ser <#> signal
Displays the current state of the input signals for each line (V.35 or RS232) attached to the card
in slot #. A value of 0 indicates an inactive signal, and a value of 1 indicates an active signal.
SNMP COMMANDS
When the SNMP Agent is enabled on the CyberSWITCH, the following command is available:
snmp stats
Displays the current SNMP related statistics. Refer to SNMP Statistics, for a list of available
statistics and their definitions.
SPANNING TREE COMMANDS
Spanning Tree protocol is supported only on the two port Ethernet-2 adapter card. The Ethernet-1
adapter card does not support Spanning Tree protocol, but does have access to the “BRIDGE AGE
TIME” Spanning Tree Information.
When Spanning Tree protocol is enabled on the CyberSWITCH, the following commands are
available:
br stpport <port #>
Displays Spanning Tree port information for the specified port number (either “1” or “2”).
br stpbrdg
Displays Spanning Tree bridge information.
SPANNING TREE PORT INFORMATION
When Spanning Tree protocol is enabled on the CyberSWITCH, the following Spanning Tree Port
Information is available for each LAN port on the system. This information is generated by issuing
the
br stpport <port #>
Spanning Tree command.
Port Priority
The configured priority for this port.
Zobrazit stránku 613
1 2 ... 609 610 611 612 613 614 615 616 617 618 619 ... 728 729

Komentáře k této Příručce

Žádné komentáře