Enterasys Networks CSX7000 Uživatelský manuál stáhnout pdf (Strana 362)

100

101

USER’S GUIDE

362 CyberSWITCH

number/range configured for the Remote LAN port differs from the network number/range that

is being broadcasted in RTMP packets by other remote routers, the port becomes unusable.

Configuration

In order to properly set up an AppleTalk Remote LAN, you must:

• enable AppleTalk Routing from Options

• configure the WAN (Remote LAN) port from Options, AppleTalk Routing, AppleTalk Ports

•enable bridging and optionally specify an AppleTalk network number for the pertinent device

level entries from Security, Device-Level Databases, On-node Device Entries

Considerations

Note the following in regard to the AppleTalk Remote LAN feature:

• The CyberSWITCH does not initiate connections to AppleTalk Remote LAN devices. The re-

mote bridge is responsible for connecting to the CyberSWITCH. The CyberSWITCH can for-

ward packets to the remote device once a connection is established.

• AppleTalk spoofing is not currently supported for this feature.

• Off-node route lookup is not currently supported for this feature.

APPLETALK STATIC ROUTES

CONFIGURING APPLETALK STATIC ROUTES

USING CFGEDIT

1. Select AppleTalk Static Routes from the AppleTalk Routing Menu.

2. Press 1 to add a static route.

3. Select the AppleTalk network type of the destination network.

4. Enter the destination network range/number reachable through this static route.

5. Enter the AppleTalk address of the Next Hop device, or, enter “0.0” if the Next Hop device is

over an unnumbered link.

6. If you entered “0” for the AppleTalk address of the Next Hop device, enter the device name of

the Next Hop device. (Note that the device information for the Next Hop device must be

already configured. Refer to Configuring a On-node Device Database for instructions for

configuring device information.)

7. Enter the number of hops for this route.

8. Enter the zone name(s) of the remote network.

For an extended network, there will be a default zone name, and there will possibly be

additional zone names.

For nonextended networks, there will be a single zone name.

1 2 ... 357 358 359 360 361 362 363 364 365 366 367 ... 728 729

Komentáře k této Příručce

Žádné komentáře

Enterasys Networks CSX7000 Uživatelský manuál Strana 362

Komentáře k této Příručce